Top quality condensation cure C-silicone; translucent and resistant up to 200ºC
- Ratio by weight 100:3,  Hardness 20 ShA
- Working Time: 30min,  Setting Time: 12 Hours
- Improved accuracy, increased tear resistance

Curing Agent at 3% WT: 30min; ST: 12 Hours; Dimensional Variation 0.2%
Curing Agent at 4% WT: 15min; ST: 3 Hours; Dimensional Variation 0.3%
Curing Agent at 5% WT: 5min; ST: 45 minutes; Dimensional Variation 0.4%

Introduction to Silicon Mold-Making

RC 00 Platinum SilGel Rapid is addition cure RTV silicone rubber, 00 ShA "no-hardness"; 7min working time and 40min of cure
- Ultra-low viscosity; Translucent
- High deadening power and good resistance to high temperatures u pto 200ºC
- High accuracy in reproducing very small details (2Microns)
- High levels of softness and skin compatibility
- Excellent mechanical resistance and excellent dimensional stability.
Recommended to avoid sulpher-based modeling clays, latex products and tin-cure silicone near the Platinum addition cure silicones, while working with, avoid contamination of part A with part B Silicone Mold: Introduction

RC 10 Platinum SilSkin SuperFast addition cure 10 ShA RTV silicone rubber; working time 5min,setting time 20min designed for Body Casting, Life Casting and special effects
- Transparent
- High deadening power and good resistance to high temperatures
- High accuracy in reproducing very small details (2Microns)
- High levels of softness and skin compatibility
- Excellent mechanical resistance and excellent dimensional stability, Non-Toxic
Recommended to avoid sulpher-based modeling clays, latex products and tin-cure silicone near the Platinum addition cure silicones; avoid contamination of part A with part B

Addition Cure 1:1 Translucent Silicone with 3H setting time, hardness 30 ShA desined for prototyping, mouldmaking
model-making,  tampography jewellery and ceramic serigraphy, Non Toxic
Recommended to avoid sulpher-based modeling clays, latex products and tin-cure silicone near the Platinum addition cure silicones, while working with, avoid contamination of part A with part B

RC 40 Platinum Fast 1:1 addition cure silicone with hardness 40 ShA is designed for fast and fine detail reproduction
- Super fast cure WT: 7min, ST: 40Min
- Very low viscosity 6000cP, excellent reproduction
- High dimensional stability and long term stability
- Excellent mechanical characteristics of mold; easy to trim
- Extremely high tear strength and chemical resistance
- Remarkable resistance to high temperatures and aging
- Excellent anti-stick effect, Non Toxic 
Recommended to avoid sulpher-based modeling clays, latex products and tin-cure silicone near the Platinum addition cure silicones, while working with, avoid contamination of part A with part B. Introduction to Silicon Mold-Making

#Improved Formula# Addition Cure 1:1 Silicone with hardness 50 ShA, high dimension stability. Designed for mass production of articles with high detail and low depth up to 40mm, high mechanical and temperature resistance up to 400ºC, Non Toxic
Recommended to avoid sulpher-based modeling clays, latex products and tin-cure silicone near the Platinum addition cure silicones, while working with, avoid contamination of part A with part B. Introduction to Silicon Mold-Making

ZA 22 THIXO BODY  brushable paste designed for body casting and vertical application and for Brush-On (brush-up) mold technique
Easy to use, mixing ratio 1:1  ---  Working Time: 6min  --- Setting time : 15-20min
Please note that while this product is classed as skin safe ALWAYS test on a small  area to ensure suitability of the product with the subject

Chromatic Alginate Mix by weight 3 parts of water to 1 part of alginate (300gr:100gr)
• Very detailed in the reproduction
• Long dimensional stability (up to 5 days)
• Easy mixing, homogeneous mass compact and smooth surface
• Working time 90sec