#Our exclusive product# Liberon High Performance Epoxy Wood Filler combines wood processability with great stability of epoxy resin. Developed for restoration and rebuild critical areas such as missing edges or missing parts, especially for outdoor use.
Apply on a clean, dry and dust-free surface. Loose and degraded parts of the wood ​​must be removed with a brush. Before applying:
• On painted or varnished wood: we suggest stripping with V33 Paint Stripper
• On waxed wood: we suggest remove the wax with Liberon Wax Remover.
Mix well, adding pbv ( parts by volume) the same quantity of Part A to Part B. If you are not going to use the entire package, avoid contamination obetween Part A and Part B.
Wear gloves. Fill carefully, let the mixture penetrate well with a spatula. To increase yield and for general bulking, for an extra resistance to the outside and exteriro application due to contraction and expansion of wood we suggest adding cellulose fibers. For larger quantities, see our alternative Epoxy Wood Modelling Paste Adhesive. Color can be corrected with our Artist's and Restauro Pigments.

Developed for restoration Epoxy Wood is unfilled non-pigmented 100% PURE epoxy resin, being a more versatile alternative for the Araldite 427. System with 2 different colours 1:1 (parts by volume or parts by weight) is specially developed for facile manual application. Easily obtains desired consistency and a necessary color with the addition of cellulose fibers and powdered pigments. Pure and unfilled Epoxy Wood has perfect consistency to fill small and deep cracks; for outdoor application, temperature fluctuating environments for modeling and tooling we suggest adding cellulose fibers from 5% to 40% by weight (consistency of Araldite 427 is + 40% cellulose fibers). For filling of microfractures, holes or consolidation of rotted wood Epoxy Wood can be thinned to brushable or injectable consistence. Fluidity is obtained adding pure alcohol at 5% by weight.
With low density 0,68g/ml and hardness 60-65 Shore Epoxy Wood combines stability of the epoxy resin and processability of wood. High adhesion with most structural supports, indicated  for model construction, restoration and repair of small and large critical areas, edges of wood, resin and stone models.
When using: We recommend add the correct amount pbw (parts by weight) of Part 1 to the same amount pbw (parts by weight) of Part 2 and mix for 2-5min; if necessary, add mineral or celullose fillers. TECHNICAL SPECS. 
For smaller quantities see alternative Liberon High Performance Epoxy Wood Filler.

Working time@22ºC: 50 min
Cure time@22ºC: 12 hours

Structural non-toxic 100% solids adhesive  with unique 1:1 ratio,  low hardness, low density easily pigmentable and fast cure super-fluid epoxy consolidant Technical Specs

Non Toxic, 100% solids, fast cure Technical Specs

Formulated for high temperature applications Poduct Technical Sheet

ALCHEMIX Gelcoat EP 4093 is a colourless, two component, brushable, room temperature curing surface coat. GELCOAT EP 4093 is designed for applications where high heat resistance negatives and very fine surface finishes are required.

TDS Gelcoat EP 4093

Laminating EpoxyTDS EP 519+H50

Tech Data PU3583 low density soft, elastomeric foam 90-110 kgm-3
Tech Data PU3587 medium density soft, elastomeric foam 140-180 kgm-3
Tech Data PU3588 high density, elastomeric foam 460-540 kgm-3
Tech Data PU3615 medium density rigid foam 80 – 88 kgm-3
Tech Data PU3617 medium density rigid foam 240 – 260 Kgm-3

Tough, durable, polyurethane elastomer used for mould making or prototype parts requiring high tear strength and excellent abrasion resistance.

Technical Specifications